Equipment and Supplies

Mold Inspection NJ, Mold Testing NJ, Mold Remediation NJ, Mold Removal NJ, Since 1995

As a leader in mold inspection, mold testing, mold remediation, and mold removal, Certified Mold Removal Inc. has the lowest prices and the best answers to your mold removal problems. We are certified, licensed, and fully insured mold removal specialists. In addition, we have been working with the people in, Dayton NJ, Little Silver NJ, Branchburg NJ, Shrewsbury NJ, High Bridge NJ, Pittstown NJ, and most other towns in the state by helping them deal with their, mold inspection, mold testing, mold removal, mold remediation, issues since 1995.
07717 Black Mold Testing Avon NJ Black Mold Inspection 07717 Black Mold Removal Avon NJ Black Mold Remediation 07717
07717 Black Mold Testing Avon NJ Black Mold Inspection 07717 Black Mold Removal Avon NJ Black Mold Remediation 07717

Equipment and supplies

There is a variety of equipment and supplies that are necessary to properly perform mold remediation work. It is important that the contractor you choose to perform mold removal is trained and has the necessary skill to use this equipment properly. Here is where a contractor’s training and experience comes into play.

Below is a list of inspection tools that a mold inspector needs to properly diagnose your problem:

  1. Thermo-hygrometer: This is used to monitor relative humidity in a building structure.
  2. Moisture Meter: This device is used to detect moisture levels inside wood, sheetrock, and concrete surfaces.
  3. Mold Sampling Device: A machine used along with an Air-O-Cell Bio-aerosol Sampling Cassette to sample the air within a building structure.
  4. Sterile Surface Swabs: These are used to take direct sampling of fungi that is growing on a surface for analyzing.
  5. Respirator: Used to protect the inspector from breathing in potentially toxic fungi.
  6. Tyvek Suit: A protective suit used to prevent toxins from entering the body through the skin.
  7. Booties & Gloves: Like the protective suit above, booties and gloves help keep the inspector safe from contamination.
  8. Eye Protection: Used to prevent toxins from entering the body through the eyes.
  9. Pliers & Screw Drivers: Used to aid the inspector in inspecting areas hidden from view.

Zefon Bio Pump used to sample air within a building structure

HEPA Vacuum used to remove mold particles during the mold removal process

Below is a list of inspection tools and equipment used to remove mold during the mold remediation process:

  1. Air Scrubbers: Machines used to remove airborne contamination from within a building structure.
  2. Commercial Dehumidifiers: These machines have a larger capacity to remove more moisture from the air than standard residential dehumidifiers. Humidity is a common cause of mold growth in building structures.
  3. Fogger: This machine is used for the application of Antimicrobials in the air of a contaminated building for the purpose of killing airborne mold spores.
  4. Antimicrobials: A chemical used by professional mold removal companies to kill mold at the roots.
  5. HEPA Vacuums: A vacuum system which utilizes a high efficiency particulate air filter removing particles down to 0.3 microns. These vacuums are used to vacuum mold spores, preventing them from escaping back into the air.
  6. Encapsulants: A coating or sealant formulated to be applied over an existing substance in a building that will provide a permanent barrier between the coated substance and the living environment. These are used after the mold is removed from a contaminated surface to aid in preventing its return.
  7. Containment: A precaution used to minimize cross-contamination from contaminated to uncontaminated areas of a building. Containment normally consists of 6-ml polyethylene sheeting, used to prevent cross-contamination.

Mold Removal, Mold Remediation, Mold Testing, Mold Inspection, Dayton NJ, Little Silver NJ, Branchburg NJ, Shrewsbury NJ, High Bridge NJ, Pittstown NJ

Please ask to see our latest, mold remediation, mold removal, mold testing, mold inspection, projects in, Dayton New Jersey, Little Silver New Jersey, Branchburg New Jersey, Shrewsbury New Jersey, High Bridge New Jersey, Pittstown New Jersey.County New Jersey, Bergen County New Jersey, Essex County New Jersey, Hunterdon County New Jersey, Passaic County New Jersey, Sussex County New Jersey, Somerset County New Jersey, Union County New Jersey.

Mold Remediation, Mold Removal, Mold Testing,
Mold Inspection, New Jersey